Operation mode of solar cell sorting instrument

Operation mode of solar cell sorting instrument

1. Main interface

2. Sorter control interface (main interface)

3. Light source control interface

4. Automatic testing interface

5. Data collection and analysis interface

6. Fault diagnosis and alarm interface

7. Parameter settings: Different parameters can be customized according to user needs; Different testing conditions can be set; Can choose testing standards; You can also customize test conditions.

8. Data query: Historical records can be queried on the user interface or in the software.

9. Set alarm: When the user interface detects a problem, an alarm prompt will appear. When there is a problem, an alarm prompt will also appear.

10. System upgrade: The system can be updated in the software or upgraded in the software for data collection and analysis.

11. Parameter settings: Users can modify different parameters according to their own needs; If there are different systems, users can also set parameters for different systems; If the user does not specify a parameter, it defaults to the standard parameter.

12. Standard test conditions: Set the test conditions according to the quality requirements of the battery cells. For example, the conversion efficiency of battery cells is ≥ 18%, and the test conditions are: open circuit voltage ≥ 170V, short circuit current ≥ 3A. When setting each project, you can select the project that needs to be tested.

13. Measurement records: Users can view each test record; It is possible to set whether each battery cell is selected as a standard test sample. If a standard sample is selected during a certain testing process, the test data for that process will appear on the interface; If selected as a standard sample, the interface will display the test data of each battery cell during the process; If it is a standard sample but has not been selected as a standard sample, the battery cell data that was not selected as a standard sample during the process will be displayed (possibly due to the user selecting an unqualified standard sample);

14. Data query: It is possible to query the test data of each battery cell. keywords：